TEL: +86-757-26390479
Categories
Contact Us
Foshan JinQiFa Metal Products Co.,Ltd
Add: No.3, 3rd Road, Gaocun New Industrial District, Beijiao Town, Foshan City, Guangdong Province, China
Tel: +86-757-26390479
Mob: +8613544772319
Fax: +86-757-2381-7619
E-mail: jinqifa.seller@gmail.com
Knowledge
Home > Knowledge > Content
Setting of lightning rod
Nov 29, 2018

(1) There should be no less than 5m distance between the independent lightning rod and the protected object, so as not to fight back when lightning rod is struck.

Independent lightning rod should be set up a separate grounding device, and the ground distance between the grounding network is not less than 3m. (2) 35kV and below high-voltage distribution device frame and roof should not be installed lightning rod.

The lightning rod mounted on the frame shall be connected with the grounding net and a centralized grounding device should be installed.

(3) A lightning rod should not be installed on the door frame of the transformer.

(4) lightning rod and grounding device distance from the road and outlet should be greater than 3m, otherwise should be paved with gravel or asphalt surface 5~8cm thick, in order to protect the person from stride harm.

(5) It is strictly forbidden to install overhead lighting lines, telephone lines, broadcast lines, antennas and so on in lightning rods or structures. (6) If lighting is installed on an independent lightning rod or frame, its power cord must use a lead-skin cable or penetrate into a steel pipe and be buried directly above 10m in the length of the ground.


  • Contact Us
    Foshan JinQiFa Metal Products Co.,Ltd
    Add: No.3, 3rd Road, Gaocun New Industrial District, Beijiao Town, Foshan City, Guangdong Province, China
    Tel: +86-757-26390479
    Mob: +8613544772319
    Fax: +86-757-2381-7619
    E-mail: jinqifa.seller@gmail.com
  • Categories
  • Copyright © Foshan JinQiFa Metal Products Co.,Ltd All Rights Reserved.